How To Connect Pool Vacuum To Pump

Regular pool cleaning and vacuuming helps keep your water and surrounding area clear and safe. Before cleaning the pool, you’ll need to know how to properly attach the vacuum to the pool pump. Follow our step-by-step guide below.

Necessary Supplies

The first step to this task is having the right supplies on hand. Gather these few things prior to setting off on this cleaning process:

• Pool Vacuum: You will need a vacuum that has been specifically designed to clean swimming pools.
• Vacuum Head: This attaches to the telescopic pole and is responsible for removing debris from the pool surface.
• Hose: You will need a hose that’s long enough to reach from your pump to all corners of the pool.
• Telescopic Pole: This is an extendable rod allowing you to effortlessly reach different pool areas.
• Thread Seal Tape: This tape can help create secure seals between thread connections.
• Vacuum Plate Or Skimmer Basket: Either piece is needed for your pool’s circulation system.
• Adapter Or Coupling Kit: Depending on the pump’s connection type, an adapter or coupling kit may be needed.

How To Connect Your Pool Vacuum To The Pump

Connecting the pool vacuum to the pump is an essential step in the pool cleaning checklist. Follow our step-by-step guide below to perform this DIY task properly.

Step 1. Preparation

• Before starting this task, make sure you have all the necessary tools and equipment in place and ready for use.
• This includes all the items outlined above.

Step 2. Turn The Pump Off

• For safety purposes, it’s crucial to always make sure the pump is off before connecting any equipment.

Step 3. Position Vacuum Head

• Position the vacuum head at one end of your pool.
• Securely attach it to the telescopic pole.
• Make sure the connection is tight while still allowing easy maneuverability.

Step 4. Attach Hose

• Take one end of the vacuum hose and connect it firmly to the nozzle found atop the vacuum head.
• Twist this clockwise until it is securely in place.

Step 5. Prime The Hose

• For proper suction, you must prime or fill the entire length of the hose with water.
• Do this before connecting it to the dedicated suction line or skimmer.
• Submerge one end of your hose into the pool.
• Hold onto the other end of the hose until all air bubbles ultimately escape.

Step 6. Connect To Suction Line Or Skimmer

• Once primed, attach either end of the full hose directly into the skimmer basket throat or into a dedicated suction line port.
• This port may not be available in every pool system.

Step 7. Ensure Secure Connections

• Now it’s time to double-check all your connections.
• Inspect where the hose has been attached.
• Make sure it is tight and doesn’t feature any air gaps or leaks.

Step 8. Turn The Pump On

• Once everything is connected properly, you can turn your pump on.
• Watch as your vacuum head moves along the pool floor, clearing the area of any dust and debris.

Conclusion

It’s no secret that regular vacuuming and cleaning are essential parts of owning and maintaining a pool. By following the guide above, you’ll be able to efficiently clean your pool and create a more inviting environment for your summer pool parties and gatherings.