Tag Archives: Pool Maintenance

How Much Does A Pool Pump Replacement Cost?

Pool ownership will always require general maintenance throughout the year, including repairs to the pool liner and heater. Of course, occasionally you may have to replace the pump, as well. The pump is a vital component of the pool’s filtration system, making a replacement necessary when the time comes. Pool experts say pumps should be replaced every 8-12 years, on average. When hiring a professional to replace the pump, one can expect to pay between $80-$200 for manual labor.

How To Tell If Pool Pump Is Going Bad

A total of two elements are present in pool pumps: the pump and motor devices. Either device could end up going bad over time. Here are a few key signs that indicate it may be time for a replacement:

1. Complete motor failure.

2. The pump is not pumping water.

3. The pump is leaking.

4. Motor is making loud noises.

Replace Pool Pump Motor Or Whole Pump?

How can a homeowner know when a motor needs to be replaced or the entire pump? Generally, when a pump is ten years old or less and there are no signs of deterioration on the exterior, simply replacing the motor is the best bet. Now, if the pump is older and there are clear indications of wear and tear, a full pump replacement is the way to go. Motor replacement is cheaper than replacing the pump. If you opt to replace the pump yourself, typical costs range from $25-$200. Tack on an additional $40-$100, if you choose to hire a professional to perform this task.

Drain A Pool With A Pump

Step 1:

Unroll your pump’s intake hose to the center of the pool, then submerge it into the water.

Step 2:

Make sure you place the outlet house in an area that will not cause any unwanted flooding in or around the surrounding pool area. If any flooding damage occurs, contacting a professional pool service is recommended for the cleanup.

Step 3:

Now plug the pump’s cord into the most convenient electric outlet. Turn the power on, make sure the pump is working properly and let the pump go to work for you.

Step 4:

Draining a pool could take several hours to complete. This doesn’t mean your job is done as soon as the pump begins to run, though. You’ll want to keep an eye on it, just to make sure the process is running smoothly. Monitor the draining progress and water level throughout the day.

Step 5:

The last step is very simple. Once you see the water level is too low to be drained further, turn the pump off completely.

Best Time To Drain A Pool

Industry experts recommend that you drain and refill your pool between the fall and winter months in Arizona. This means any time from the beginning of October to the end of February is ideal for a complete draining and refill. The winter is said to be the best time of year possible to drain a pool. Dry summer months are not recommended due to the high possibility of damages being done to your pool. With little moisture in the air during the summer, your pool’s surface could crack. Wait until the cooler months to perform any pool maintenance.

Why Drain A Pool?

A full draining and refill of your backyard pool is essential at times. When you drain your pool, you will rid the area of any unwanted build-up on the surface or the walls. Another benefit of a pool draining is this gives you the chance to perform any other maintenance that needs to be performed before the spring and summer seasons. An acid wash has been proven to be one of the most effective cleanups your pool will experience. Pool professionals can perform any additional tasks to keep your water in the best shape possible moving forward.